‹ field notes

FCC AND CE CERTIFICATION COST

2026-11-22 · for founders & owners · 15 min read · endothermal systems

One founder posted two quotes in April 2026 for testing one device for the US, the EU, and the UK: £3,200 and £14,000. Why does FCC and CE certification cost vary by more than 4 times for one product? Each quote prices its own list of tests. You have to know all of them before you pay.

In these rules, a radio is any part that talks over the air: Wi-Fi, Bluetooth, cellular, or LoRa. The FCC regulates the parts that transmit. The EU also counts a part that only receives, such as a GPS receiver.

What your device triggers

Each feature you add brings its own rule. The rules differ by market. Start with the simplest device: a board with a microcontroller, a battery, and no radio. Its clock runs above 9 kHz. The FCC counts that board as an unintentional radiator under Part 15. You authorize it before sale with a Supplier's Declaration of Conformity (SDoC): you test it, keep the records, and file nothing with the FCC. In the EU, the same board falls under the EMC Directive, and you declare conformity yourself.

One exemption fits a few small devices: every clock below 1.705 MHz and no mains connection. A device that runs while it charges from a wall adapter loses it. A kit is not exempt either. The FCC's home-built exemption excludes devices built from a kit.

Now add Bluetooth or Wi-Fi. The device becomes an intentional radiator. A certification body must certify it before you market it. The certification body is a private company the FCC recognizes. Its grant gives the device an FCC ID. In the EU, any radio moves the whole product under the Radio Equipment Directive (RED), even a GPS receiver that only listens. RED then covers the product's safety at any voltage and its EMC as well.

Put that radio on a wrist and the FCC treats it as a portable device: the antenna sits within 20 cm of a person. Output above 1 mW, and above a threshold set by distance and frequency, needs an RF exposure evaluation. The EU counterpart is a low-power exposure assessment under EN 62479, inside RED.

A battery device under 75 V DC meets these triggers in each market.

FeatureUS rule and pathEU rule and path
Digital circuitry, no radioPart 15 Subpart B, SDoC; Class B for products sold to the publicEMC Directive, self-declared
Radio of any kindCertification by a certification body, FCC IDRED, self-declared where harmonized standards apply in full
Worn or held, antenna within 20 cmPortable device, RF exposure evaluation above the thresholdsEN 62479 assessment inside RED
Internet connection, radio productNo mandatory FCC rule foundRED cybersecurity since August 1, 2025; Cyber Resilience Act reporting since September 11, 2026
Lithium batteryUN 38.3 test summary for shippingGeneral Product Safety Regulation for safety; Battery Regulation labels and removability
Any electronicsNone foundRoHS declaration; WEEE registration in each country you sell to
USB charging on listed radio devices (headphones, keyboards, mice, speakers)None foundUSB Type-C receptacle since December 28, 2024
Logic parts from a Covered List companyNo new authorization since October 13, 2026None found
Seller outside the marketResponsible party located in the US for SDoC; US agent for certificationEconomic operator in the EU, named on the product
Bluetooth name or logoBluetooth SIG listing fee, $12,000 per product since March 1, 2026Same fee

Great Britain still accepts CE marking for radio, EMC, safety, and RoHS, with no end date stated. Northern Ireland requires CE.

What a pre-certified module removes

A pre-certified module removes the transmitter's own certification. Picture the simplest plan: buy an ESP32 module with an FCC grant, solder it to your board, and ship. The module keeps its grant. Your label reads "Contains FCC ID" with the module's number. You file no new application.

But your board still has its own clock and its own traces. The FCC's guidance for module hosts, KDB 996369 D04, leaves you two jobs. The first is Part 15 Subpart B for the digital circuitry, usually by SDoC. The second is a test of the finished product with the transmitter on, including a check of spurious emissions, even with one module inside. A product that exceeds the limits must not reach the market.

The grant holds only under the conditions the module maker tested. Four changes break it:

  • An antenna other than the one in the grant
  • Use closer to a person than the grant allows
  • Two or more transmitters operating at once
  • A limited modular grant that names other host products

Each change has the same exits. The module maker files a Class II permissive change. Or you file a change in FCC ID and then the Class II change yourself. Or you file for your own FCC ID. No lab publishes a price for any of them.

Read the module's grant before you call a lab. Espressif's grant for the ESP32-WROOM-32E approves it for mobile use, 20 cm or more from all persons. A portable host needs a Class II permissive change or a new application. The same grant lists 6 mW of conducted output in the Bluetooth band, 2402 to 2480 MHz, 6 times the 1 mW exemption.

The EU has no modular approval. Your product needs its own RED assessment. With the module's antenna and power settings, the module's reports carry much of it, but the radiated spurious emissions of your product remain. One founder reported that most of the module's CE tests carried over.

Covered by the moduleStill on you
US: the transmitter's certification and FCC IDPart 15 Subpart B for the board
US: radio tests inside the grant's conditionsSpurious emission check with the transmitter on
EU: much of the radio testing, with the same antenna and powerRED assessment of the whole product, including radiated spurious emissions
Nothing outside the grantAny change of antenna, distance to the body, or transmitters operating together

A device that sits on a desk, uses the module's antenna, and carries one radio stays inside the grant. For that device, a lab visit and the module's paperwork cover the radio.

Published prices and paid prices

One US lab publishes $4,900 to $10,000 for certification with a pre-certified module. Five founders who reported a paid US price for module-host testing paid $1,900 to about $3,500, with a middle value of about $2,400. The lab's low end is twice that middle value. The gap is not a filing fee: the lab bills certification-body fees on top of its range. Our reading, which the lab does not state: most founders bought Part 15 Subpart B alone, and the lab's range might include the transmitter check and the documents.

In published prices, region moves the total more than any other line. For a product with its own radio, the middle of the published ranges is $2,300 at a lab in Shenzhen and $9,950 at a US lab. The FCC assumed a similar ratio in October 2026. Its economic analysis for order FCC 26-73 puts testing outside the US and its reciprocal partners at about $1,400 per unlicensed transmitter, a figure taken from that same Shenzhen lab. It assumes labs in other partner countries charge 20% more and US labs 400% more, the bounds of what commenters predicted.

P=P0×(1+m)

Here P is a lab's price, P0 is the FCC's $1,400 base price, and m is the markup. At m = 0.20, a partner-country lab charges $1,680. At m = 4.00, a US lab charges $7,000. Read $7,000 as the regulator's assumption, not a measured price. It falls below the one US lab's published range for an unlicensed transmitter, $7,900 to $12,000.

Every paid figure in the table is self-reported on Reddit, with no invoice behind it. Years are the year of the post or the page.

PathPublished by labsReported by founders
No radio, FCC SDoC$1,900 to $5,000, US lab, 2024; from $400, Shenzhen lab, 2026$500, Taiwan lab, 2026; $1,000 to $1,200, China, 2024; about $6,000 overall, US, recalled, 2026
No radio, CE EMC$120 to $150 per test hour, Shenzhen lab, 2024€3,000 to €5,000 for basic EMC with certificate, estimated, 2025
Module host, FCC$4,900 to $10,000, US lab, 2024$1,900 to about $3,500 paid, five reports, 2024 to 2026; $8,000 to $10,000 quoted
Module host, FCC and CENone published$7,000 to $8,000 with RoHS and battery checks, China, 2026; £3,200 and £14,000 quoted, 2026
Own radio$7,900 to $12,000, US lab, 2024; $1,100 to $3,500, Shenzhen lab, 2026$12,200 for FCC, Canada, and CE, US lab, 2019; about $15,000 for FCC and Canada, US lab, 2026
RF exposure, worn on the bodyNone publishedSAR test quoted at $15,000; exemption report $500 to $2,000, 2026
Bluetooth listing$12,000 per product, 2026; $11,040 before March 2026$9,600, an older fee still cited, 2026
FCC fees$35 grantee code; $50 confidentiality request, 2025None reported
Where do founders' paid prices and quotes fall against a US lab's published range?No radio, SDoC: US lab $1,900 to $5,000, paid $500, $1,100, quoted $6,000; Module host: US lab $4,900 to $10,000, paid $1,900, $2,000, $2,390, $2,500, $3,500, quoted $2,150, $2,500, $8,000, $8,000, $10,000; Own radio: US lab $7,900 to $12,000, paid $4,000, $15,000No radio, SDoCUS lab $1,900 to $5,000Module hostUS lab $4,900 to $10,000Own radioUS lab $7,900 to $12,000$5,000$10,000$15,000a price a founder paida quote or a recalled pricea US lab's published rangeone cell = $500
Figure 1. Founders' prices against a US lab's published range, FCC. On the module-host path, every reported US payment sits below the low end of the published US range.

Why two quotes differ

A certification quote is a list of lines, one per regime and standard, plus reports, filings, agents, and retest terms. SparkFun published the quote it paid in 2019 for its own Bluetooth module, line by line.

LineStandards behind itPrice
FCC Part 15C, with RF exposureFCC radio rules$4,000
ISED (Canada)Canadian radio rules$3,000
Canadian agentRequired for a foreign applicant$600
CE REDEN 300 328, EN 301 489-1 and -17, EN 62479$2,800
CE LVD (safety)IEC 62368-1:2014$1,800
Total$12,200

SparkFun received other quotes at "double and triple" that amount. The editions in its list date from 2019. The EU now cites EN 300 328 V2.2.2 and EN 301 489-17 V3.3.1. EN 62479 is not a harmonized standard under RED, though labs still use it for low-power exposure. Every source that compares quotes for what looks like the same work shows a spread of 2 to 4 times: £3,200 against £14,000 and $2,500 against $8,000.

The lines that move are named in the same threads and lab pages.

DriverWhat it changesSource
Transmitter verificationA lab can test Part 15 Subpart B alone or add the transmitter-on check that the FCC's host guidance asks forFCC KDB 996369 D04; Reddit
Radios and operating modesEach radio and mode adds test configurationsReddit
Number of productsOne worst-case test can cover a family; one lab refused that for three products on modules with different FCC IDs, and the quote went from $2,150 for one to $7,000 for threeReddit
Product sizeOne large product was tested in a parking lotReddit
DocumentsWho writes the reports and declarations, you or the labReddit
Retest termsOne $2,500 quote included a retestReddit
FCC and CE in one visitSaves about a day of chamber timeReddit
RegionPrices vary by about 50% within one country; Taiwan runs about 50% to 75% of US or European pricesEMC FastPass; Reddit
Lab eligibilityA lab that loses FCC recognition before your filing prices a test you cannot useFCC 26-73

Ask each lab to list the standard and clause behind every line. Then compare the quotes line by line.

One device, two shapes

Take a Bluetooth Low Energy sensor that logs temperature, built on the ESP32-WROOM-32E. Version A sits on a shelf. Version B straps to a wrist. The assumptions, labeled for the arithmetic:

  • One radio, the module's own antenna, no other transmitter
  • A lithium cell, charged over USB from a wall adapter
  • Sold in the US and the EU, with the Bluetooth name on the box
  • Tested at a US lab, passing on the first attempt

Version A stays inside the module's grant. You need Part 15 Subpart B by SDoC and the transmitter-on check. Founders report paying $1,900 to about $3,500 for that work. The Bluetooth name adds the $12,000 listing fee. Whether a product on an already listed module still pays the full fee is unsettled: the fee page is silent, and two answers in a Nordic forum thread disagree. Budget it.

CA=T+FBT

T is the lab bill and F_BT is the Bluetooth listing fee. When T equals $1,900, C_A is $13,900. When T equals $3,500, C_A is $15,500. The listing fee is 3 to 6 times the lab bill.

Version B leaves the grant. The grant covers mobile use only, at 20 cm or more from all persons, and the wrist puts the antenna within millimeters of skin. The 6 mW output is above the 1 mW exemption. Whether the threshold set by distance exempts it is a calculation under 47 CFR 1.1307(b)(3). At 2.45 GHz the threshold is 2.7 mW at 0.5 cm, the closest distance the formula allows, and 10 mW at 1 cm. So 6 mW passes from about 0.75 cm outward. Closer than 0.5 cm, only a SAR evaluation remains. Either way, the exemption covers the exposure evaluation, not the grant. You have four ways forward.

OptionWhat it costsThe failing
Keep the grant as it standsNothing extraThe grant excludes portable hosts. The product cannot be marketed in the US
Move the antenna 20 cm from the bodyA redesignEven in its best form, the product stops being a wrist product
Ask the module maker for a Class II permissive changeFiling price not published, plus an RF exposure evaluationEspressif decides whether and when to file
File for your own FCC IDMoves you toward the own-radio row: $7,900 to $12,000 published at a US labThe full certification price and time

The exposure evaluation alone runs $500 to $2,000 for an exemption report or a quoted $15,000 for a SAR test.

CB=T+FBT+E+Fchange

E is the exposure evaluation. F_change is the Class II filing. When E equals $500 to $2,000, C_B is $14,400 to $17,500 before the filing. When E equals $15,000, C_B is $28,900 to $30,500 before the filing. The strap adds at least $500 and up to $15,000 to the same electronics.

In the EU, both versions need a RED assessment of the whole product. The module's reports carry much of it. No lab publishes a price for the module route under CE alone, and no founder reported one. One founder paid $7,000 to $8,000 for FCC and CE together at a lab in China, with RoHS and battery checks. Version B is a wearable that processes personal data, so point (e) of the RED cybersecurity rules reaches it. Point (d), for internet-connected radios, does not: the Commission's RED guide treats a Bluetooth-only device as not internet-connected, subject to the maker's own risk assessment. If the user can skip setting a password, the harmonized standard EN 18031 gives no presumption of conformity, and a notified body must assess that part. No notified body publishes a price.

What does moving the same electronics from a shelf to a wrist add to the US bill?A, on a shelf $13,900 to $15,500: lab bill $1,900 to $3,500, Bluetooth listing $12,000; B, on a wrist, exemption report $14,400 to $17,500 + filing: lab bill, Bluetooth listing, exposure report $500 to $2,000, Class II filing; B, on a wrist, SAR test $28,900 to $30,500 + filing: lab bill, Bluetooth listing, SAR test $15,000, Class II filingA, on a shelf$13,900 to $15,500lab bill $1,900 to $3,500Bluetooth listing $12,000B, on a wrist, exemption report$14,400 to $17,500 + filinglab billBluetooth listingexposure report $500 to $2,000Class II filingB, on a wrist, SAR test$28,900 to $30,500 + filinglab billBluetooth listingSAR test $15,000Class II filingwhat the wrist addsupper end of a rangeno published priceone cell = $500
Figure 2. The same electronics on a shelf and on a wrist, US bill. The same board costs $13,900 to $15,500 on a shelf and $14,400 to $30,500 on a wrist, before the filing.

FCC and CE compared

The US sends every radio device to a third party before sale. The EU lets you declare most radio devices yourself, where you apply the harmonized standards in full.

QuestionUS (FCC)EU (CE)
Who approves a device with no radioYou, by SDoCYou, by EU declaration of conformity
Who approves a radio deviceA certification body, before marketingYou, where harmonized standards apply in full; otherwise a notified body for the radio and cybersecurity parts
Credit for a certified moduleNo new FCC ID inside the grant's conditionsNone; the product needs its own RED assessment
Which lab may testCertification: accredited and FCC-recognized. SDoC: any lab not owned or directed by a prohibited entityAny lab, or you; no accreditation required for self-declaration
What you fileNothing for SDoC; the certification body issues the grantNothing; you keep the technical file
Mark on the productPart 15 statement for SDoC; FCC ID or "Contains FCC ID" for certificationCE mark
RecordsKept by the responsible partyTechnical file and declaration, kept 10 years
Seller outside the marketResponsible party located in the US for SDoC; US agent for certificationEconomic operator in the EU, with its postal address on the product, package, or documents
Government fees$35 grantee code; $50 confidentiality requestNone to affix CE
CybersecurityNo mandatory rule found; the Cyber Trust Mark is voluntaryRED rules since August 1, 2025; Cyber Resilience Act in full from December 11, 2027
Selling before approvalPre-orders allowed with a disclosure; no delivery before authorizationNo pre-order rule like the FCC's; an online offer aimed at EU buyers counts as making the product available. A sample may be shown at a trade fair with a visible notice

For the wrist version of the worked example, the US path adds a filing that the EU path does not have.

How long certification takes

Founders whose products passed on the first attempt report 3 to 6 weeks from booking to report: about a month for a module host at one US lab, 3 to 4 weeks at a lab in Taiwan, and 6 weeks for SparkFun's own radio. One US lab gives 8 to 12 weeks as the average for a connected device. The test days are the short part.

StageTimeSource
PreparationAbout 2 months before 3 weeks of testing, one reportReddit
Pre-scanHalf a dayReddit
Wait for a lab slotNot publishedNone found
Emissions testing1 to 2 daysEMC FastPass
Immunity testing1 to 4 daysEMC FastPass
Report3 to 10 daysEMC FastPass
Certification grantAs little as 2 to 3 business days after complete documentsCompliance Testing
Fail, fix, and retestAdds 2 to 4 weeks, one engineer's estimateReddit

No source measures how often products fail the first time. One guide puts it at about 50% and cites nothing. A pre-scan is the cheap check. One founder paid a couple of hundred dollars for one and caught a clock harmonic at 240 MHz. The retest it avoided would have cost $4,000 to $5,000.

The wait for a slot is the number most likely to move. The FCC counts 82.3% of 2025 applications as tested in China and 3.6% in the US. One lab group expects higher prices as recognized capacity shrinks.

You can take money before the grant. US rules allow pre-orders with a prominent notice that delivery depends on authorization, plus the refund terms. Delivery to the customer before authorization is not allowed.

Rule changes through 2028

A lab price counts only if that lab can still test for your filing. Under FCC order 26-73, every application received from December 1, 2028 must rely on testing in the US or a reciprocal economy. Grants issued before that date stay valid with no retest, unless set aside or revoked. The order was not yet in the Federal Register on November 22, 2026.

The reciprocal list includes the EU member states, the UK, Canada, Mexico, Japan, South Korea, Taiwan, Hong Kong, Singapore, Malaysia, Vietnam, Australia, and Israel. Mainland China, India, Thailand, the Philippines, and Switzerland are not on it. The cheapest published prices in this piece come from a lab in Shenzhen. Taiwan, which founders name as the cheaper option, stays eligible.

SDoC testing needs no FCC-recognized lab. Since September 8, 2025, it still cannot run at a lab owned or directed by a prohibited entity. Ask your lab in writing whether it remains eligible.

DateRuleWhat it reaches
December 13, 2024EU General Product Safety Regulation appliesSafety risks that no product-specific law covers
December 28, 2024EU USB Type-C receptacleListed radio device types
August 1, 2025RED cybersecurity rules applyRadio products that reach the internet; wearables, toys, and childcare products that process personal data
September 8, 2025FCC bars labs and certification bodies tied to prohibited entitiesCertification and SDoC
December 26, 2025Covered modular transmitters barredHosts that use them
September 11, 2026Cyber Resilience Act vulnerability reporting: early warning in 24 hours, notification in 72Products with digital elements, including those already on the market
October 13, 2026FCC Covered List component ruleDevices with logic parts from Covered List companies
February 18, 2027EU removable portable batteries; some small or sealed wearables may leave replacement to professionals where safety requires itBattery devices
March 1, 2027Marketplaces with physical access to or title over a device must show a valid FCC IDCertified devices; an SDoC device has no FCC ID
June 1, 2027The same, for marketplaces that rely on seller statementsCertified devices
December 11, 2027Cyber Resilience Act in full; RED cybersecurity rules repealedProducts with digital elements
December 1, 2028FCC applications must rely on labs in the US or reciprocal economiesEvery new certification

Limits

The figures here fit a battery or USB-powered device under 75 V DC, sold in the US and the EU. They leave out:

  • Mains-powered products: safety testing under EN 62368-1 and a US safety listing
  • Licensed radios such as cellular, beyond the published price ranges
  • Canada and other markets, except as lines in a quote
  • Medical devices

Every paid figure is self-reported, with no invoice and no survey behind it. No source measures how often the FCC acts against unauthorized devices. The legal points come from the primary texts and are information, not legal advice.

FAQ

Do I need FCC certification if my module is already certified? No. Inside the module's grant, you file no new certification. Your product still needs Part 15 Subpart B, usually by SDoC, and a spurious emission check with the transmitter on.

If my product has the CE mark, does it still need FCC approval? Yes. CE covers the EU and the FCC covers the US. One lab visit can test for both and save about a day of chamber time.

How much does FCC certification cost? Founders report $500 to about $6,000 for a device with no radio, $1,900 to about $3,500 for a module host at a US lab, and about $15,000 for their own radio at a US lab. One US lab publishes $1,900 to $5,000, $4,900 to $10,000, and $7,900 to $12,000 for the same three paths.

How long does FCC certification take? Founders report 3 to 6 weeks from booking for a device that passes on the first attempt. A failure adds 2 to 4 weeks.

Can I take pre-orders before certification? Yes. In the US, the listing must state that delivery depends on authorization and give the refund terms. Delivery before authorization is not allowed.

Is a kit exempt from FCC rules? No. The home-built exemption covers devices that are not marketed, not built from a kit, and made in quantities of five or fewer for personal use.

Do I need a notified body for CE? Usually no. You need one where you do not apply the harmonized standards in full to the radio or cybersecurity requirements. That includes the EN 18031 cybersecurity standard when a user can skip setting a password.

What does selling without FCC authorization risk? The FCC's base forfeiture for marketing unauthorized equipment is $7,000. The maximum is $25,132 per violation and $188,491 for a continuing violation, at 2025 levels with no change for 2026.

Where we fit

If you hold a quote and cannot tell which tests it leaves out, or whether your design stays inside the module's grant, we can check both. You get a written answer within 24 hours. Send us the quote and the design if that would help: call +1 (307) 910-2696 or write to hello@endothermalsystems.com.
Send us your quote →

US rules and FCC documents:

EU and UK rules:

Prices, fees, and lab guidance:

Founder reports (Reddit):

Related: how much a hardware prototype costs · how to turn an idea into a product.

endothermal systems llc · home · field notes · pricing · privacy · © 2026